12 ports 2L+8T8R(3842) BF 2m Antenna

12 ports 2L+8T8R(3842) BF 2m Antenna
F+D Hybrid Serial Antenna

Electrical Specifications
Frequency Range (MHz)		2 × (690–803) (R1, R2)
		690-803	791-862			880-960
Polarization		±45°
Electrical Downtilt (°)		2-12, Independently continuously adjustable
Gain (dBi)	at mid Tilt	14.8	15.2			15.4
	over all Tilts	14.7±0.7	15.1±0.7			15.3±0.7
Side lobe suppression for first side lobe above main beam (dB)		>17	>17			>17
Horizontal 3dB Beam Width (°)		67±5	65±5			63±5
Vertical 3dB Beam Width (°)		11.2±1	10.2±0.8			9.1±0.8
Cross-Polar Ratio, 0° (dB)		>18	>18			>18
Front to Back Ratio, ±30° (dB)		>22	>22			>22

VSWR		≤1.5
Intermodulation IM3 (dBc)		≤-153 (2 x 43 dBm carrier)
Cross Polar isolation (dB)		≥25
Interband isolation (dB)		≥25 (R1, R2)
Max. power per port (W)		250
Impedance (Ω)		50
Grounding		DC Grounding
Values based on NGMN recommendations on Base Station Antenna Standards 12.0 (BASTA 12.0)
General Electrical Properties
General parameters	Frequency Range (MHz)			3300-4200 (P1)
				3300-3800	3800-4200
	Polarization			±45°
	Electrical Downtilt (°)			2-12, continuously adjustable
	Electrical downtilt tolerance (°)			±1
	Max. power per port (W)			50 (at 50℃ ambient temperature)
	Impedance (Ω)			50
	Grounding			DC Grounding
Calibration and electrical parameters	Coupling factor between calibration port and each antenna port (dB)			-26±2	-26±2
	Max. amplitude tolerance from calibration port to input ports (dB)			0.8	0.9
	Max. phase tolerance from calibration port to input ports (°)			7	7
	VSWR			＜1.5	＜1.5
	Co-polarization isolation between ports (dB)			≥20	≥20
	Cross-polarization isolation between ports (dB)			≥24	≥24

TDD LTE Electrical Specifications
Radiation parameters	Frequency Range (MHz)		3300-4200 (P1)
	Frequency Range (MHz)		3300-3800	3800-4200
	Single column beam	Gain (dBi)	15.5±0.7	16±0.6
		Horizontal 3dB Beam Width (°)	85±15	75±15
		Front to Back Ratio (dB)	>24	>23
		Cross-Polar Ratio, 0° (dB)	>16	>15
		Vertical 3dB Beam Width (°)	6.0±0.6	5.5±0.7
		Side lobe suppression for first side lobe above main beam (dB)	>16	>16
	65° Broadcast beam	Gain (dBi)	16.8±0.8	17.2±0.8
		Horizontal 3dB Beam Width (°)	65	65
		Front to Back Ratio (dB)	>25	>25
		Vertical 3dB Beam Width (°)	6.0±0.6	5.5±0.7
		Side lobe suppression for first side lobe above main beam (dB)	>16	>16
	Service beam	0° direction Beam Gain (dBi)	20.6±0.6	21.2±0.6
		0° direction Beam Horizontal 3dB Beam Width (°)	25	23
		0° direction Beam Front to Back Ratio, ±30° (dB)	>30	>30
		0° direction Beam Cross-Polar Ratio, 0° (dB)	>18	>18

	5G NR Electrical Specifications
	Radiation parameters	Frequency Range (MHz)			3300-4200 (P1)
		Frequency Range (MHz)			3300-3800	3800-4200
		Single column beam		Gain (dBi)	15.5±0.7	16±0.6
				Horizontal 3dB Beam Width (°)	85±15	75±15
				Front to Back Ratio (dB)	>24	>23
				Cross-Polar Ratio, 0° (dB)	>16	>15
				Vertical 3dB Beam Width (°)	6.0±0.6	5.5±0.7
				Side lobe suppression for first side lobe above main beam (dB)	>16	>16
		NR Broadcast beam		Gain (dBi)	19.2±0.8	19.7±0.8
				Horizontal 3dB Beam Width (°)	65	65
				Front to Back Ratio (dB)	>25	>25
				Vertical 3dB Beam Width (°)	6.0±0.6	5.5±0.7
				Side lobe suppression for first side lobe above main beam (dB)	>16	>16
		NR Service beam		0° direction Beam Gain (dBi)	20.6±0.6	21.2±0.6
				0° direction Beam Horizontal 3dB Beam Width (°)	25	23
				0° direction Beam Front to Back Ratio, ±30° (dB)	>30	>30
				0° direction Beam Cross-Polar Ratio, 0° (dB)	>18	>18
Mechanical Specifications
RET type			Integrated RET (AISG2.0/3GPP)
AISG Connectors (1 in 1 out)			2 x 8 pin (in: Male; out: Female)
Connector			4 x 4.3-10 Female, 1 x (MQ4 + MQ5) Male, Bottom
Antenna dimensions (H x W x D) (mm)			1985 x 500 x 160
Packing dimensions (H x W x D) (mm)			2285 x 615 x 290
Antenna weight (kg)			32
Clamps weight (kg)			6
Diameter of installation pole (mm)			φ50-φ110
Radome material			Fiberglass
Radome color			Light grey
Operational temperature (℃)			-40 to +70
Wind load at 42m/s (N)			1158/ 371/ 1158 (Frontal/ Lateral/ Rearal)
Max. operational wind speed (km/h)			200