XXXXPol 698-960MHz/1710-2690MHz *3 65° 17dBi/18dBi 2-10°/2-10° Integrated RET( Remote Control Unit ) Antenna
- KBT65DP17181818-0727BE-I
- Mobile Communication
- Panel Antenna
- 698-960/1710-2700
- 17
- 65
- ±45°
Product model：KBT65DP17181818-0727BE-I
● Integrated RET( Remote Control Unit ) Antenna
● XXXXPol 698-960MHz/1710-2690MHz *3
● 65° 17dBi/18dBi 2-10°/2-10°
KBT65DP17181818-0727BE-I |
Electrical specifications | ||||||
Frequency range (MHz) | R1(698-960) | Y1、Y2、Y3(1710-2690) | ||||
698-824 | 824-894 | 880-960 | 1710-1920 | 1920-2170 | 2300-2690 | |
Polarization | ±45° | |||||
Gain (dBi) | 16 | 16.5 | 17 | 16.5 | 17 | 17.5 |
Electrical downtilt (°) | 2-10 | 2-10 | ||||
Horizontal power beam width (°) | 68 | 65 | 62 | 65 | 63 | 60 |
Vertical power beam width (°) | 9.5 | 8.5 | 7.5 | 7.5 | 6.5 | 5.5 |
1st Upper sidelobe suppression(dB) | ≥15 | ≥15 | ||||
Front-to-back ratio (dB) | ≥25 | ≥25 | ||||
Cross-polar discrimination (dB) | ≥15 (±60≥8) | ≥15 (±60≥8) | ||||
In Band Isolation (dB) | ≥25 | ≥25 | ||||
Inter Band Isolation (dB) | ≥25 | |||||
Impedance (Ω) | 50 | |||||
VSWR | ＜1.5 | ＜1.5 | ||||
Intermo dulation IM3 | ≤-150dBc(2×43dBm carrier) | ≤-150dBc(2×43dBm carrier) | ||||
Maximum power (W) | 300 | 200 | ||||
Ground protection | DC Grounding | |||||
Mechanical specifications | |
Connector | 8*4.3-10 Female |
Connector position | Bottom |
Height/width/depth (mm) | 2490(±10)*385(±4)*138(±4) |
Packing size (mm) | 2740*460*275(±10) |
Antenna weight (kg) | 27(±2) |
Bracket weight(Kg) | 4(±0.5) |
Radome material and color | UPVC/Gray |
Mechanical tilt(°) | 0-10 |
Operating temperature (℃) | -40 to +60 |
Rated wind velocity (m/s) | 60 |
Wind Load @150km/h Frontal / Lateral / Rearside (N) | 1070/479/1337 |
Equivalent flat plate area | 2.49*0.385㎡ |
Suitable pole diameter (mm) | Φ50-Φ115 |
Mounting kit | JM-900DZA |
Integrated RET Properties | |
Ret Model | KRCU20D-4 |
Input Voltage | 10–30Vdc |
Protocol to CCU/TMA | 3GPP / AISG 2.0 |
Power consumption | ≤2W Idle, ≤13W In Motion |
RET type | Integrated RET, Replaceable |
Connectors to CCU | 5-pin DIN Female &5-pin DIN Male , conform to AISG 2.0 |
